Crown Trim Roofers logo

Roofing Contractor in Long Beach, CA

A roofing contractor in Long Beach, CA faces three different jobs: salt-air wear at Belmont Shore and Naples, period homes in Bixby Knolls and California Heights, and flat roofs near the port. A 30-minute drive brings us to you, and we walk you through photos from the roof.
  • 4.8★ from 73 Google reviews
  • Free estimates
  • Same day or next day service
  • Photos of what we find
Long Beach waterfront homes at Naples with tile roofs beside the canals and Alamitos Bay, with a low marine layer over the water

Long Beach is about 12 miles and 30 minutes from our PCH base, and its roofs are the widest mix in our reach. The Belmont Shore and Naples waterfront sits in salt air. Bixby Knolls and California Heights have period homes with details worth keeping. Around the port, large flat buildings take the weather differently. A single estimate here can span all three.

Roof jobs from Second Street to the harbor district

Salt, age and flat decks each drive different work. Pick the service that matches your roof.

Row of tile-roofed homes along a Naples canal in Long Beach with salt-stained trim and docks below
Canal-side homes where salt air and humidity work on trim, metal and sealants.

Long Beach's own permit office and historic review

Long Beach runs its own building office through Development Services, not LA County. Re-roof permit paperwork is something we take on. Before you order material, confirm the current steps with the city for your address, because historic districts can add design review.

Canal-side Naples and Belmont Shore: salt-air wear

Naples and Belmont Shore sit beside Alamitos Bay, so morning mist leaves a salty film on everything. The roof surface often holds up fine. The small metal parts fail first: nails, flashing, vent covers, rail posts on roof decks and gutter hardware. Rust lets water in at the joints, then stains ceilings below.

Homes here often have tile, rooftop decks or low-slope sections, so we look at drains and waterproofing too. A roof deck leak is usually the deck seam, not the tile. We photograph each problem and show you before anything is repaired. Our moss and algae guide covers the damp-air growth that follows.

California Heights and Bixby Knolls period homes

California Heights is a designated historic district of 1920s and 1930s bungalows near Bixby Knolls. Craftsman homes have low gables, wide eaves and exposed rafter tails. Spanish revival houses have tile and stucco parapets. Both need a roofer who matches profile and color instead of stripping personality.

Wide eaves also mean old fascia and sheathing, so a re-roof sometimes turns up rotted boards. We tell you what we find and show photos. Our period home roofing tips for Long Beach go into the details. Nearby unincorporated areas use different permit offices, which our Los Angeles County page explains.

Tile, tar and two layers: what ages a Long Beach roof

Long Beach rebuilt heavily after the 1933 earthquake, so many homes are Spanish revival and Mediterranean houses from the 1930s with clay or concrete tile, sitting near 1920s Craftsman bungalows with composition roofs and decades of patches. Naples was laid out from 1903 as an Italian-style canal village, and its red tile roofs are part of how the island looks from the water. Tile outlasts the felt under it, so a handsome tile roof can leak through dried-out underlayment while every tile looks fine. Our tile roof underlayment replacement page explains when the tile comes up and goes back down.

Marine air adds a second clock. Mornings off Alamitos Bay and the harbor leave moisture that feeds moss and algae on shaded slopes, and salt eats fasteners, as the Naples section above describes. Flat decks over garages and around the port add a third profile: ponding, patched seams and clogged scuppers. The building code generally limits how many layers of roofing a roof may carry, so a roof with two old layers usually needs a full tear-off rather than another cover. Ask the city, because local amendments and historic review can change the answer.

Large low-slope warehouse roof near the Port of Long Beach with ponded water around a drain after rain and container cranes on the horizon
A wide low-slope roof near the port, where ponding and clogged drains show up after rain.

How a Long Beach visit works from our Torrance base

Expect same day or next day service for a free estimate or roof inspection once you call. Parking is tight on the streets near Second Street, so we ask where a truck can stand. Canal-side lots can have narrow access, and port buildings may need gate or safety clearance.

You receive photos and plain explanations of repair and replacement options. Where a repair will hold, that is what we recommend. We protect landscaping and driveways, and cleanup is thorough.

Second Street, Bixby Knolls and the airport district: knowing the ground

A Long Beach visit changes with the neighborhood. Second Street in Belmont Shore is the tight-parking commercial strip, with Belmont Pier at the water end and Marine Stadium and Alamitos Bay to the east. Atlantic Avenue runs through Bixby Knolls, and California Heights adjoins it with its grid of bungalows. Long Beach Airport sits further north on Lakewood Boulevard near Spring Street, ringed by commercial and industrial buildings, and the harbor district lies to the south and west.

If your home is in a historic district or is a landmark, the city asks for a Certificate of Appropriateness for exterior changes, and Long Beach publishes a re-roofing application for it through its Historic Preservation staff. Confirm whether your street is covered before you commit to a material. A like-for-like replacement is usually the simpler request, and shingle samples are brought to the estimate so you can compare color and profile on your own roof.

1920s Craftsman bungalow in California Heights, Long Beach, with a low gabled shingle roof, wide eaves and mature street trees
A period bungalow with wide eaves and exposed rafter tails, details a re-roof has to respect.

Our base and how to reach us from Long Beach

Crown Trim Roofers, 2765 Pacific Coast Hwy, Torrance, CA 90505. Approximate drive: about 30 min (12 mi).

Get directions

Request a Quote

Prefer to talk? Call (209) 563-1278 first. It is the fastest way to reach us.

Roofing questions from Long Beach

Does salt air at Belmont Shore and Naples shorten a roof's life?

It speeds up wear on metal parts more than on the roof surface. Flashing, vent covers, fasteners and gutter hardware near the water corrode sooner, and sealants dry out. We check those pieces first at a free roof inspection and tell you which can be repaired. Read our salt air and roofs guide for the coastal pattern.

Can you re-roof a period home in California Heights without losing its look?

Usually, yes, if the material and profile are matched carefully. Matching your tile and shingles as nearly as we can is the aim, and shingle samples come to the visit. California Heights is a designated historic district, so check with Long Beach Planning on whether design review applies. See our period home roofing tips.

Do you work on roofs near the Port of Long Beach?

Yes. We handle homes, apartments, storage facilities and commercial buildings, and flat roofs are common around the port and the airport district. Large low-slope decks are inspected for ponding, seams, drains and old patches. We show photos of any problem and explain repair and replacement choices before work starts.

Who issues roofing permits in Long Beach?

Long Beach has its own city building department, Development Services, and does not use LA County Public Works. Permit details on a re-roof are ours to look after; the city is the place to confirm current steps and any historic review for your address.

Nearby areas we serve

More in Los Angeles County and across all service areas.

Salt-air wear on your roof? Book a free look.

Crown Trim Roofers · 2765 Pacific Coast Hwy, Torrance, CA 90505 · (209) 563-1278

Call (209) 563-1278
Call (209) 563-1278