Roofing Contractor in El Segundo, CA
- 4.8★ from 73 Google reviews
- Free estimates
- Same day or next day service
- Photos of what we find

LAX sits directly north of El Segundo, which is about 12 miles and 30 minutes from 2765 Pacific Coast Hwy. The city took its name from the second Standard Oil refinery in California, and the refinery, aerospace campuses and office parks still define its economy. Next to them is a compact grid of early and mid-century homes along Main Street and the streets around it. A roofer can be on a flat membrane roof in the morning and a hip roof on a bungalow in the afternoon.
Refinery, aerospace and office roofs east and west of Sepulveda
The big roofs are low-slope or metal. Office and aerospace buildings east of Sepulveda Boulevard carry rooftop equipment, drains and parapets, and every curb and pipe is a place where water can enter. Metal panel roofs on industrial buildings lose sealant at laps and fasteners over time. How we trace leaks is shown in our warehouse roof leaks guide.

Coastal moisture also matters. El Segundo sits close to the ocean, so marine layer keeps drains and low spots damp. Membranes, sealants and fasteners show their age sooner than they do inland. We check them in the dry season, so repairs happen before the November rain.
Choosing a roofing contractor in El Segundo for commercial and residential work
The cards below show how the two halves of the city's roofs divide.
Commercial Roofing
Office, aerospace and industrial roofs near Sepulveda are mostly low-slope or metal, with rooftop equipment and tenants to plan around before any repair starts.
Warehouse & Industrial Roofing
Large light-industrial roofs near the refinery and aerospace campuses have long drainage runs and controlled-access sites, so access rules and drain checks come first.
Commercial Roof Maintenance
A property manager with several buildings east of Sepulveda gets a yearly drain, seam and sealant check with photos, done in the dry season before the November rain.
Flat Roofing
Flat membrane roofs on offices and light industry fail at seams, drains and curbs around rooftop units, and the repair depends on the membrane that is already there.
Flat Roof Repair
Every curb, duct and conduit that a mechanical contractor adds to an office roof is a new place for water to enter, so flashing around each unit is checked and photographed.
Chimney Flashing & Sealing
Older brick chimneys on the town grid of early and mid-century homes show cracked mortar and rusting flashing, and the base of the chimney is a classic first leak.
Roof Repair
Older stucco homes in the town grid need flashing, vent boots and shingle repairs before replacement is considered, with photos of each trouble spot.
Roof Inspection & Maintenance
Yearly checks of drains, sealants and fasteners keep marine moisture from becoming a ceiling leak in an office building or a stain in a bungalow.
Older bungalows near Main Street
Residential El Segundo is a grid of single-story homes from the early and mid-twentieth century, many with composition shingles that have been replaced once or twice. Typical problems are cracked vent boots, rusting flashing at chimneys and walls, and valleys that have been patched. To decide how far to take a fix, read our repair or replace guide.

Brick chimneys, add-on equipment and wind off the ocean
On the house side, chimneys are the item to watch. Many El Segundo bungalows kept their brick chimneys through a re-roof or two, and the mortar cracks while the metal flashing at the base rusts and pulls away. Water gets in at that joint, runs down the masonry and shows up as a stain on a wall or ceiling near the fireplace. A small chimney job is usually a repair of the flashing and mortar line, not a new roof.

On commercial roofs, the trouble is often added equipment. Mechanical contractors replace rooftop units over the years, and each swap can leave a new curb, a patched cut or conduit that was never sealed to the membrane. We trace leaks to those details before suggesting anything bigger. The coast is only a couple of miles west, so afternoon onshore wind and a damp marine layer work on edges, laps and sealants. Buildings beside the refinery or on controlled campuses may also have badge, escort or safety orientation rules, and we ask about them when we schedule.
Scheduling a visit around tenants, LAX noise and City Hall
Once you phone, a same day or next day visit for your free estimate or roof inspection is the aim. Photos show the trouble spots, we talk through repair and replacement in plain language, and a fix gets recommended before anyone mentions a new roof. On commercial buildings, we ask about tenant hours, deliveries and roof access, and plan around them.
City Hall is on Main Street, and El Segundo runs its own Building Safety division. Permit offices differ across the county, as our Los Angeles County page explains. For re-roofs we take care of permit details, cover plants and paving, and clean up before we leave.
Our base and how to reach us from El Segundo
Crown Trim Roofers, 2765 Pacific Coast Hwy, Torrance, CA 90505. Approximate drive: about 30 min (12 mi).
Roofing questions from El Segundo
Can you repair metal and flat roofs on office and industrial buildings in El Segundo?
Yes. We repair low-slope membrane roofs, recoat and re-seal them, and fix metal panel roofs where fasteners have backed out or laps have opened. We plan around tenants and deliveries and photograph what we find. See commercial roofing and the Title 24 commercial re-roof guide for what a re-roof may involve.
Do planes from LAX affect how you work on an El Segundo roof?
Mainly through wind and noise. The airport sits just north, so jets pass overhead and gusts can come off the runways. We secure materials and tarps and talk through timing for homes with sensitive sleepers. On residential jobs we protect landscaping and driveways and clean up thoroughly.
Does El Segundo have its own building department for roofing permits?
Yes. El Segundo is incorporated, with City Hall on Main Street and its own Building Safety division, so neither LADBS nor LA County Public Works is involved. Re-roof permit paperwork gets sorted by us. Commercial re-roofs may involve energy-code items and requirements can change, so confirm current steps for your address.
How often should a flat office roof near the coast be inspected?
At least yearly, ideally in early autumn before the November rain, and after any heavy storm or rooftop equipment work. We check drains, seams, flashing and sealants and photograph them. Our commercial roof maintenance plan guide explains what a yearly plan can cover.
Nearby areas we serve
More in Los Angeles County and across all service areas.
Flat roof or older home? Book an inspection.
Crown Trim Roofers · 2765 Pacific Coast Hwy, Torrance, CA 90505 · (209) 563-1278